[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.47+rpt-rpi-v7 (serge@raspberrypi.com) (arm-linux-gnueabihf-gcc-14 (Raspbian 14.2.0-19+rpi1) 14.2.0, GNU ld (GNU Binutils for Raspbian) 2.44) #1 SMP Raspbian 1:6.12.47-1+rpt1 (2025-09-16) [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero 2 W Rev 1.0 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x0e000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0e000000..0x1dffffff (262144 KiB) map reusable linux,cma [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000001effffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001effffff] [ 0.000000] percpu: Embedded 19 pages/cpu s45708 r8192 d23924 u77824 [ 0.000000] pcpu-alloc: s45708 r8192 d23924 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_hdmi=0 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=B8:27:EB:84:8B:BB vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=60bac01f-02 rootfstype=ext4 fsck.repair=yes rootwait consoleblank=0 loglevel=1 quiet logo.nologo video=1280x720 [ 0.000000] cgroup: Disabling memory control group subsystem [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 126976 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37297 entries in 110 pages [ 0.000000] ftrace: allocated 110 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000012] Switching to timer-based delay loop, resolution 52ns [ 0.000287] Console: colour dummy device 80x30 [ 0.000301] printk: legacy console [tty1] enabled [ 0.000380] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000397] CPU: Testing write buffer coherency: ok [ 0.000429] pid_max: default: 32768 minimum: 301 [ 0.000502] LSM: initializing lsm=capability [ 0.000658] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000672] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001533] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002550] Setting up static identity map for 0x100000 - 0x10003c [ 0.002669] rcu: Hierarchical SRCU implementation. [ 0.002676] rcu: Max phase no-delay instances is 1000. [ 0.002876] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.003333] smp: Bringing up secondary CPUs ... [ 0.004022] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.004761] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.005406] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.005493] smp: Brought up 1 node, 4 CPUs [ 0.005508] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.005518] CPU: All CPU(s) started in HYP mode. [ 0.005523] CPU: Virtualization extensions available. [ 0.005990] Memory: 205072K/507904K available (11264K kernel code, 1593K rwdata, 3564K rodata, 1024K init, 376K bss, 37740K reserved, 262144K cma-reserved) [ 0.006370] devtmpfs: initialized [ 0.014385] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.014533] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.014563] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.021187] pinctrl core: initialized pinctrl subsystem [ 0.022123] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.023605] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.026817] audit: initializing netlink subsys (disabled) [ 0.027019] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.027404] thermal_sys: Registered thermal governor 'step_wise' [ 0.027656] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.027669] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.027890] Serial: AMBA PL011 UART driver [ 0.033410] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.044056] raspberrypi-firmware soc:firmware: Attached to firmware from 2025-08-20T17:04:24, variant start_cd [ 0.054063] raspberrypi-firmware soc:firmware: Firmware hash is cd866525580337c0aee4b25880e1f5f9f674fb24 [ 0.066552] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.070787] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1 [ 0.074604] SCSI subsystem initialized [ 0.074763] usbcore: registered new interface driver usbfs [ 0.074800] usbcore: registered new interface driver hub [ 0.074835] usbcore: registered new device driver usb [ 0.075127] pps_core: LinuxPPS API ver. 1 registered [ 0.075135] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.075152] PTP clock support registered [ 0.076737] clocksource: Switched to clocksource arch_sys_counter [ 0.077081] VFS: Disk quotas dquot_6.6.0 [ 0.077103] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.087869] NET: Registered PF_INET protocol family [ 0.088031] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.088748] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.088777] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.088821] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.088849] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.088906] TCP: Hash tables configured (established 2048 bind 2048) [ 0.088974] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.089003] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.089119] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.089459] RPC: Registered named UNIX socket transport module. [ 0.089467] RPC: Registered udp transport module. [ 0.089473] RPC: Registered tcp transport module. [ 0.089479] RPC: Registered tcp-with-tls transport module. [ 0.089484] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.097041] Trying to unpack rootfs image as initramfs... [ 0.917168] Freeing initrd memory: 13740K [ 1.287033] Initialise system trusted keyrings [ 1.287274] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 1.287865] NFS: Registering the id_resolver key type [ 1.287886] Key type id_resolver registered [ 1.287893] Key type id_legacy registered [ 1.287913] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.287921] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.288402] Key type asymmetric registered [ 1.288411] Asymmetric key parser 'x509' registered [ 1.288465] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.288475] io scheduler mq-deadline registered [ 1.288483] io scheduler kyber registered [ 1.288521] io scheduler bfq registered [ 1.289895] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes [ 1.297176] ledtrig-cpu: registered to indicate activity on CPUs [ 1.298487] simple-framebuffer 1f953000.framebuffer: framebuffer at 0x1f953000, 0xa8c00 bytes [ 1.298513] simple-framebuffer 1f953000.framebuffer: format=r5g6b5, mode=720x480x16, linelength=1440 [ 1.298986] Console: switching to colour frame buffer device 90x30 [ 1.300605] simple-framebuffer 1f953000.framebuffer: fb0: simplefb registered! [ 1.303927] bcm2835-rng 3f104000.rng: hwrng registered [ 1.304172] vc-mem: phys_addr:0x00000000 mem_base=0x1fa00000 mem_size:0x20000000(512 MiB) [ 1.311700] brd: module loaded [ 1.316293] loop: module loaded [ 1.316848] Loading iSCSI transport class v2.0-870. [ 1.317834] usbcore: registered new interface driver lan78xx [ 1.317877] usbcore: registered new interface driver smsc95xx [ 1.317886] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.318006] dwc_otg: FIQ enabled [ 1.318013] dwc_otg: NAK holdoff enabled [ 1.318018] dwc_otg: FIQ split-transaction FSM enabled [ 1.318028] Module dwc_common_port init [ 1.318181] usbcore: registered new interface driver usb-storage [ 1.318320] mousedev: PS/2 mouse device common for all mice [ 1.319718] sdhci: Secure Digital Host Controller Interface driver [ 1.319727] sdhci: Copyright(c) Pierre Ossman [ 1.319904] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.319953] hid: raw HID events driver (C) Jiri Kosina [ 1.320043] usbcore: registered new interface driver usbhid [ 1.320050] usbhid: USB HID core driver [ 1.320166] bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default [ 1.324111] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 (8000003f) counters available [ 1.324824] Initializing XFRM netlink socket [ 1.324858] NET: Registered PF_PACKET protocol family [ 1.324927] Key type dns_resolver registered [ 1.325144] Registering SWP/SWPB emulation handler [ 1.344448] registered taskstats version 1 [ 1.344622] Loading compiled-in X.509 certificates [ 1.352243] Key type .fscrypt registered [ 1.352257] Key type fscrypt-provisioning registered [ 1.358355] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 1.358828] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 1.359056] serial serial0: tty port ttyAMA1 registered [ 1.360133] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.360671] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.361457] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.361469] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 1.390580] of_cfs_init [ 1.390696] of_cfs_init: OK [ 1.390960] clk: Disabling unused clocks [ 1.391606] PM: genpd: Disabling unused power domains [ 1.473729] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) [ 1.478039] Freeing unused kernel image (initmem) memory: 1024K [ 1.478427] Run /init as init process [ 1.478434] with arguments: [ 1.478439] /init [ 1.478444] with environment: [ 1.478449] HOME=/ [ 1.478454] TERM=linux [ 1.505769] mmc1: new high speed SDIO card at address 0001 [ 1.563734] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.566414] mmc0: new high speed SDHC card at address 0001 [ 1.567082] mmcblk0: mmc0:0001 SD32G 29.1 GiB [ 1.569294] mmcblk0: p1 p2 [ 1.569750] mmcblk0: mmc0:0001 SD32G 29.1 GiB [ 2.590292] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator [ 2.590479] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator [ 2.642704] dwc2 3f980000.usb: DWC OTG Controller [ 2.642743] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 [ 2.642774] dwc2 3f980000.usb: irq 66, io mem 0x3f980000 [ 2.642961] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.642975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.642985] usb usb1: Product: DWC OTG Controller [ 2.642994] usb usb1: Manufacturer: Linux 6.12.47+rpt-rpi-v7 dwc2_hsotg [ 2.643003] usb usb1: SerialNumber: 3f980000.usb [ 2.643498] hub 1-0:1.0: USB hub found [ 2.643533] hub 1-0:1.0: 1 port detected [ 2.966759] usb 1-1: new high-speed USB device number 2 using dwc2 [ 2.986093] EXT4-fs (mmcblk0p2): mounted filesystem b8dc102a-7e9b-4989-ab46-b5a05eae6074 ro with ordered data mode. Quota mode: none. [ 3.177075] usb 1-1: New USB device found, idVendor=04b4, idProduct=6560, bcdDevice=90.15 [ 3.177104] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.177553] hub 1-1:1.0: USB hub found [ 3.177620] hub 1-1:1.0: 4 ports detected [ 3.476772] usb 1-1.1: new full-speed USB device number 3 using dwc2 [ 3.579097] usb 1-1.1: New USB device found, idVendor=10c4, idProduct=ea70, bcdDevice= 1.00 [ 3.579126] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 3.579136] usb 1-1.1: Product: CP2105 Dual USB to UART Bridge Controller [ 3.579145] usb 1-1.1: Manufacturer: Silicon Labs [ 3.579154] usb 1-1.1: SerialNumber: 01A67A2D [ 3.879565] systemd[1]: System time advanced to built-in epoch: Thu 2025-09-18 14:37:22 BST [ 4.091251] NET: Registered PF_INET6 protocol family [ 4.092213] Segment Routing with IPv6 [ 4.092262] In-situ OAM (IOAM) with IPv6 [ 4.179643] systemd[1]: systemd 257.8-1~deb13u2+rpi1-g094e686 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 4.179682] systemd[1]: Detected architecture arm. [ 4.197395] systemd[1]: Hostname set to . [ 4.300202] systemd[1]: Using hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0, device /dev/watchdog0 [ 4.300251] systemd[1]: Watchdog running with a hardware timeout of 1min. [ 5.778530] systemd[1]: Queued start job for default target multi-user.target. [ 5.852665] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 5.854782] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 5.855631] systemd[1]: Created slice user.slice - User and Session Slice. [ 5.855962] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 5.856217] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 5.857183] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 5.857350] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-60bac01f\x2d01.device - /dev/disk/by-partuuid/60bac01f-01... [ 5.857484] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 5.857710] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 5.857941] systemd[1]: Reached target paths.target - Path Units. [ 5.858115] systemd[1]: Reached target slices.target - Slice Units. [ 5.858303] systemd[1]: Reached target swap.target - Swaps. [ 5.858516] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 5.859212] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 5.867384] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 5.867900] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 5.868323] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 5.868802] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 5.869386] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 5.869747] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 5.870436] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 5.874957] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 5.878991] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 5.883561] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 5.897278] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 5.898033] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 5.903481] systemd[1]: Starting fake-hwclock-load.service - Restore the current clock... [ 5.959616] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 5.967390] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 5.974619] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 5.997596] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 6.005411] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 6.037604] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 6.038673] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 6.050888] systemd[1]: Starting systemd-journald.service - Journal Service... [ 6.082372] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 6.099217] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 6.106527] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 6.122101] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 6.122759] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. [ 6.123462] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 6.124170] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 6.125571] systemd[1]: fake-hwclock-load.service: Deactivated successfully. [ 6.127803] systemd[1]: Finished fake-hwclock-load.service - Restore the current clock. [ 6.130016] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 6.131532] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.132316] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 6.134229] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 6.135177] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 6.150974] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 6.151131] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 6.157556] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 6.167762] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 6.173333] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.177433] fuse: init (API version 7.41) [ 6.207772] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 6.214351] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.233637] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 6.239501] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 6.256613] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 6.303763] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 6.329389] i2c_dev: i2c /dev entries driver [ 6.333643] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 6.338951] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 6.347634] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 6.349878] systemd-journald[210]: Collecting audit messages is disabled. [ 6.373725] EXT4-fs (mmcblk0p2): re-mounted b8dc102a-7e9b-4989-ab46-b5a05eae6074. [ 6.379003] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 6.390222] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 6.390597] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 6.433411] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 6.444837] systemd[1]: Started systemd-journald.service - Journal Service. [ 7.353108] systemd-journald[210]: Received client request to flush runtime journal. [ 7.919336] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000 [ 7.925740] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem [ 7.983338] mc: Linux media interface: v0.10 [ 8.092642] videodev: Linux video capture interface: v2.00 [ 8.168348] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.169271] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 8.169297] [vc_sm_connected_init]: start [ 8.174716] vc_sm_cma_vchi_init: failed to open VCHI service (-22) [ 8.174738] [vc_sm_connected_init]: failed to initialize shared memory service [ 8.182979] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.250359] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 8.252504] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-22) [ 8.252795] : Unregister from media controller [ 8.252829] (efault): Unregistering node (null)[0] device node /dev/video0 [ 8.252869] (efault): Unregistering node (null)[0] device node /dev/video0 [ 8.252906] (efault): Unregistering node (null)[0] device node /dev/video0 [ 8.252942] (efault): Unregistering node (null)[0] device node /dev/video0 [ 8.321336] Bluetooth: Core ver 2.22 [ 8.321433] NET: Registered PF_BLUETOOTH protocol family [ 8.321440] Bluetooth: HCI device and connection manager initialized [ 8.321460] Bluetooth: HCI socket layer initialized [ 8.321472] Bluetooth: L2CAP socket layer initialized [ 8.321489] Bluetooth: SCO socket layer initialized [ 8.381260] Bluetooth: HCI UART driver ver 2.3 [ 8.381289] Bluetooth: HCI UART protocol H4 registered [ 8.381399] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.381794] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 8.381992] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 8.389890] Bluetooth: HCI UART protocol Broadcom registered [ 8.461889] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.489766] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 8.491551] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 8.493174] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.494751] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 8.738247] Bluetooth: hci0: BCM: chip id 115 [ 8.738295] sgtl5000 1-000a: Error reading chip id -121 [ 8.738666] Bluetooth: hci0: BCM: features 0x0e [ 8.739568] sgtl5000 1-000a: probe with driver sgtl5000 failed with error -121 [ 8.740960] Bluetooth: hci0: BCM43430B0 [ 8.740995] Bluetooth: hci0: BCM43430B0 (002.001.012) build 0000 [ 8.748636] Bluetooth: hci0: BCM43430B0 'brcm/BCM43430B0.raspberrypi,model-zero-2-w.hcd' Patch [ 8.817301] usbcore: registered new interface driver usbserial_generic [ 8.817361] usbserial: USB Serial support registered for generic [ 8.821584] brcmfmac: F1 signature read @0x18000000=0x1542a9a6 [ 8.826797] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430b0-sdio for chip BCM43430/2 [ 8.827697] usbcore: registered new interface driver brcmfmac [ 8.869675] usbcore: registered new interface driver cp210x [ 8.869753] usbserial: USB Serial support registered for cp210x [ 8.869856] cp210x 1-1.1:1.0: cp210x converter detected [ 8.882729] usb 1-1.1: cp210x converter now attached to ttyUSB0 [ 8.883538] cp210x 1-1.1:1.1: cp210x converter detected [ 8.907959] usb 1-1.1: cp210x converter now attached to ttyUSB1 [ 9.067969] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 9.077335] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/2 wl0: Mar 31 2022 17:24:51 version 9.88.4.77 (g58bc5cc) FWID 01-3b307371 [ 9.527357] Console: switching to colour dummy device 80x30 [ 9.530709] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.534876] Registered IR keymap rc-cec [ 9.535153] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0 [ 9.535371] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0 [ 9.537238] vc4_hdmi 3f902000.hdmi: 'dmas' DT property is missing or empty, no HDMI audio [ 9.538281] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.538661] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.538915] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.539132] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.539355] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.539529] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.548381] Bluetooth: hci0: BCM: features 0x0e [ 9.550171] Bluetooth: hci0: BCM4343B0 37.4MHz wlbga_iLNA_iTR [Baseline: 0092] [ 9.550222] Bluetooth: hci0: BCM43430B0 (002.001.012) build 0092 [ 9.551214] [drm] Initialized vc4 0.0.0 for soc:gpu on minor 0 [ 9.556841] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes [ 9.558042] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes [ 11.262615] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.262640] Bluetooth: BNEP filters: protocol multicast [ 11.262658] Bluetooth: BNEP socket layer initialized [ 11.272181] Bluetooth: MGMT ver 1.23 [ 11.291901] NET: Registered PF_ALG protocol family [ 11.385337] cryptd: max_cpu_qlen set to 1000 [ 11.559824] Bluetooth: RFCOMM TTY layer initialized [ 11.559862] Bluetooth: RFCOMM socket layer initialized [ 11.559888] Bluetooth: RFCOMM ver 1.11 [ 11.819287] pps_ldisc: PPS line discipline registered [ 16.017048] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 19.687104] platform soc:sound: deferred probe pending: (reason unknown) [ 25.021029] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled [ 57.672669] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 57.672697] cp210x ttyUSB1: failed to set line control: -32 [ 61.877443] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 61.877484] cp210x ttyUSB1: failed to set line control: -32 [ 66.080819] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 66.080865] cp210x ttyUSB1: failed to set line control: -32 [ 70.285693] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 70.285739] cp210x ttyUSB1: failed to set line control: -32 [ 74.488944] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 74.488984] cp210x ttyUSB1: failed to set line control: -32 [ 78.693068] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 78.693109] cp210x ttyUSB1: failed to set line control: -32 [ 82.896070] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 82.896115] cp210x ttyUSB1: failed to set line control: -32 [ 87.099574] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 87.099614] cp210x ttyUSB1: failed to set line control: -32 [ 91.303938] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 91.303980] cp210x ttyUSB1: failed to set line control: -32 [ 95.508321] cp210x ttyUSB1: failed set request 0x3 status: -32 [ 95.508366] cp210x ttyUSB1: failed to set line control: -32 [ 223.541659] usb 1-1.2: new full-speed USB device number 4 using dwc2 [ 223.644178] usb 1-1.2: New USB device found, idVendor=0d8c, idProduct=0013, bcdDevice= 1.00 [ 223.644214] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 223.644232] usb 1-1.2: Product: USB Audio Device [ 223.644246] usb 1-1.2: Manufacturer: C-Media Electronics Inc. [ 223.662206] input: C-Media Electronics Inc. USB Audio Device as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.3/0003:0D8C:0013.0001/input/input1 [ 223.722607] hid-generic 0003:0D8C:0013.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-3f980000.usb-1.2/input3 [ 223.944603] usbcore: registered new interface driver snd-usb-audio [ 2211.012672] EXT4-fs (mmcblk0p2): re-mounted b8dc102a-7e9b-4989-ab46-b5a05eae6074 r/w. [ 8294.505433] usb 1-1: clear tt 1 (9047) error -71 [11766.010564] usb 1-1: USB disconnect, device number 2 [11766.010601] usb 1-1.1: USB disconnect, device number 3 [11766.011018] cp210x ttyUSB0: failed set request 0x12 status: -19 [11766.011042] cp210x ttyUSB0: failed set request 0x0 status: -19 [11766.011432] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [11766.050942] cp210x 1-1.1:1.0: device disconnected [11766.051344] pps pps0: removed [11766.051906] cp210x ttyUSB1: failed set request 0x7 status: -19 [11766.051936] cp210x ttyUSB1: failed set request 0x12 status: -19 [11766.051955] cp210x ttyUSB1: failed set request 0x0 status: -19 [11766.052243] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1 [11766.052825] cp210x 1-1.1:1.1: device disconnected [11766.054553] usb 1-1.2: USB disconnect, device number 4 [11816.319428] Console: switching to colour frame buffer device 160x45 [11816.343823] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device [11868.326464] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed [11868.430363] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11868.430401] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-5) [11869.350330] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350359] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350374] ieee80211 phy0: brcmf_cfg80211_stop_ap: SET SSID error (-5) [11869.350393] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350407] ieee80211 phy0: brcmf_cfg80211_stop_ap: BRCMF_C_DOWN error -5 [11869.350422] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350437] ieee80211 phy0: brcmf_cfg80211_stop_ap: setting AP mode failed -5 [11869.350453] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350467] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350481] ieee80211 phy0: brcmf_cfg80211_stop_ap: BRCMF_C_UP error -5 [11869.350506] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350520] ieee80211 phy0: brcmf_vif_set_mgmt_ie: vndr ie set error : -5 [11869.350541] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350555] ieee80211 phy0: brcmf_vif_set_mgmt_ie: vndr ie set error : -5 [11869.350573] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350587] ieee80211 phy0: brcmf_vif_set_mgmt_ie: vndr ie set error : -5 [11869.350606] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.350621] ieee80211 phy0: brcmf_fil_cmd_data: bus is down. we have nothing to do. [11869.503052] mmc1: card 0001 removed [11869.541564] mmc1: queuing unknown CIS tuple 0x2a [84 b0] (2 bytes) [11869.563546] mmc1: queuing unknown CIS tuple 0x2b [21 81 20 cd ff 2e ac a1 e0 1e 00 bc 03 50 89 41 ea 1c 35 4a 69 22 00 ca 47 77 b1 48 97 ff 11 25 39 ff 15 74 64 46 96 91 a6 a2 29 ff 0e eb 23 ff 06 a1 72 10 1c ff 02 ff 19 d9 f1 cb 8a 02 18 49] (64 bytes) [11869.612347] mmc1: queuing unknown CIS tuple 0x30 [4c ff ff 25 48 2b 4e 4c ff 3d 44 41 cb 28 02 f1 03 84 0b 0b 85 44 0b 81 d1 60 0c b4 18 61 c7 e8 5f 00 91 f2 9f 23 07 a3 4c 88 7c 8a 6b 72 33 99 58 5a e2 8e 27 39 c2 11 1e 30 a3 4c 12 5e 0c 48] (104 bytes) [11869.613755] mmc1: new high speed SDIO card at address 0001 [12380.000037] vc4-drm soc:gpu: [drm] User-defined mode not supported: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x60 0x5 [12380.789867] usb 1-1: new high-speed USB device number 5 using dwc2 [12381.002993] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=76.33 [12381.003029] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [12381.003047] usb 1-1: Product: USB2.1 Hub [12381.003061] usb 1-1: Manufacturer: GenesysLogic [12381.003948] hub 1-1:1.0: USB hub found [12381.004350] hub 1-1:1.0: 6 ports detected [12381.339867] usb 1-1.1: new full-speed USB device number 6 using dwc2 [12381.461678] usb 1-1.1: New USB device found, idVendor=0951, idProduct=16dd, bcdDevice=21.11 [12381.461714] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [12381.461732] usb 1-1.1: Product: HyperX Alloy Core RGB [12381.461747] usb 1-1.1: Manufacturer: Kingston [12381.466472] input: Kingston HyperX Alloy Core RGB as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:0951:16DD.0002/input/input2 [12381.700814] hid-generic 0003:0951:16DD.0002: input,hidraw0: USB HID v1.11 Keyboard [Kingston HyperX Alloy Core RGB] on usb-3f980000.usb-1.1/input0 [12381.713062] input: Kingston HyperX Alloy Core RGB Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0951:16DD.0003/input/input3 [12381.714126] input: Kingston HyperX Alloy Core RGB System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0951:16DD.0003/input/input4 [12381.770636] input: Kingston HyperX Alloy Core RGB Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0951:16DD.0003/input/input5 [12381.771106] input: Kingston HyperX Alloy Core RGB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0951:16DD.0003/input/input6 [12381.771554] hid-generic 0003:0951:16DD.0003: input,hidraw1: USB HID v1.11 Mouse [Kingston HyperX Alloy Core RGB] on usb-3f980000.usb-1.1/input1 [12382.029867] usb 1-1.2: new low-speed USB device number 7 using dwc2 [12382.159382] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c50e, bcdDevice=25.10 [12382.159418] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [12382.159436] usb 1-1.2: Product: USB RECEIVER [12382.159451] usb 1-1.2: Manufacturer: Logitech [12382.171435] input: Logitech USB RECEIVER as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C50E.0004/input/input7 [12382.230667] hid-generic 0003:046D:C50E.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-3f980000.usb-1.2/input0 [12382.329874] usb 1-1.6: new full-speed USB device number 8 using dwc2 [12382.451640] usb 1-1.6: New USB device found, idVendor=067b, idProduct=2360, bcdDevice= 2.05 [12382.451674] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [12382.451692] usb 1-1.6: Product: USB-I2C Controller [12382.451707] usb 1-1.6: Manufacturer: Prolific Technology Inc. [12382.451721] usb 1-1.6: SerialNumber: CXCCb13AL20 [12382.456555] hid-generic 0003:067B:2360.0005: hiddev96,hidraw3: USB HID v1.11 Device [Prolific Technology Inc. USB-I2C Controller ] on usb-3f980000.usb-1.6/input0