# node 1200baud packet direwolf config

# optionally change your call to a node name here and in CDIGIPEAT below
MYCALL COOL

#delay 30 minutes if coming back from dead battery
CBEACON via=KBANN dest=BEACON delay=30:00 every=60:00 info="COOL Node, KM6LYW-10 Winlink, http://craiger.org/bbs/ http://digipi.org/ "

#connected-mode digipeat, mycall is assumed, add KCOOL
#CDIGIPEAT 0 0 COOL,KCOOL  # doesn't work
#CDIGIPEAT 0 0 ^KCOOL$   # this works, but puts "COOL*" in routed string, not KCOOL, fails

CDIGIPEAT 0 0

#NOTE: NON_STANDRD GPIO layout FOR THIS COOL NODE!!!!!!!!!!!!!!!!!! 
DCD GPIOD gpiochip0 16

# direwolf.tnc.sh will modify and uncomment one of these and copy to /run/direwolf*conf.
# Add PTT line BELOW these to override.  DO NOT edit the following PTT lines, or uncomment
# them.
#NOTE: NON_STANDRD GPIO layout FOR THIS COOL NODE!!!!!!!!!!!!!!!!!! 
#PTT GPIOD gpiochip0 12
#PTT RIG RIGNUMBER DEVICEFILE
#PTT /dev/DEVICEFILE RTS
#PTT /dev/DEVICEFILE DTR
#PTT CM108 DEVICEFILE


DWAIT 0
TXDELAY 30
TXTAIL 10
AGWPORT 8000
KISSPORT 8001

#ADEVICE plughw:0,0                
